18
The main unit mounts directly to the mounting bracket on the hand grip and the search coil mounts to
the coil connector of the Telescopic Rod Assembly.
Adjusting the telescopic rod is very important. To avoid straining any muscles and to allow for more
comfort while working with the unit, a properly adjusted telescopic rod is essential.
To adjust the telescopic rod length or the hand grip the tab locks needs to be opened as in illustration
4.3. Once opened the shaft you can extend or contract the rod to your desired length. Once the desired
length is reached, simply lock the lever down as shown in illustration 4.2. Be sure that the hand grip is
also properly adjusted for comfort.
Illustration 4.1: Telescopic Rod to mount the search coils and main unit
Illustration 4.3: Rod Shaft Lock in the
unlocked position
Illustration 4.2: Rod Shaft Lock in the
locked position
To Next Page
Loading...
