ARIA and ALBA KNX Keypad Panels - Operation and Maintenance Manual
Page 9/21
Send On command when pressed, send Off command when button is
released or vice versa.
Enable the operations:
● Short press: toggle On/Off
● Long press: cyclical increase/decrease dimming
Additional long press parameter can be configured
Enable the operations:
● Short press: toggle On
● Long press: increase dimming
Additional long press parameter can be configured
Enable the operations:
● Short press: toggle Off
● Long press: decrease dimming
Additional long press parameter can be configured
Controls the curtains/shutters up and down cyclically
Option 1: Long press disabled
Option 2: Long press enabled
Controls the curtains/shutters up or down
Option 1: Long press disabled
Option 2: Long press enabled
Sends a value to the bus as one byte or two bytes objects
Value unsigned:
[0..255]
Signed [-
128..127]