Black Nova ARIA - Page 12

ARIA and ALBA KNX Keypad Panels - Operation and Maintenance Manual
Page 11/21
Long pressing time
The long press is detected after the select amount of time
Light
master
When “Group control” is enabled the button act as lights master control
N/A
Shutters
master
When “Group control” is enabled the button act as shutters master
control
N/A
Light
decrease /
Shutters
close
When “Group control” is enabled
● Long press: decrease the value of the selected lights
● Short press: toggle the selected lights or close the selected
curtains
N/A
Light
increase /
Shutters
open
When “Group control” is enabled
● Long press: increase the value of the selected lights
● Short press: toggle the selected lights or open the selected
curtains
N/A
FCU
functions
Setpoint
increase
Increase the setpoint with button press
N/A
Setpoint
decrease
Decrease the setpoint with button press
N/A
Fan speed
cycle
Cycle the fan speed with button press
N/A
Fan speed
increase
Increase the fan speed with button press
N/A
Fan speed
decrease
Decrease the fan speed with button press
N/A
Fan speed 1
Set the fan speed 1 with button press
N/A
Fan speed 2
Set the fan speed 2 with button press
N/A
Fan speed 3
Set the fan speed 3 with button press
N/A
Fan speed
AUTO
Set the fan speed Auto with button press
N/A
FCU
ON/OFF
Turn on or off the FCU with button press
N/A
FCU
cooling/
heating
Toggle the cooling / heating mode with button press
N/A
Display
mode C/F
Toggle the display C / F mode with button press
N/A
FCU special
mode
Short press cycles the values in the special mode object 0, 1, 2, 0 and
so on, and send through this object to the KNX bus.
N/A
FCU
combined
mode
Short press cycles values in the special mode object 0, 1, 2, 0 and so
on, and send through this object to the KNX bus.
N/A