ENGLISH
BLACKSTONEPRODUCTS.COM/SUPPORT
OWNER’S MANUAL | ASSEMBLY GUIDE MODELS:
STEP 03
Remove the stand from the packaging and use the (8) M6x12
bolts (removed during step 2) to attach the legs to the bottom of the
griddle body.
STEP 04
Open the stand legs. (When the legs are fully opened, the
locking pins will engage. To close the legs, pull the locking pins.)
STEP 05
Loosen the thumbscrews on the stand legs, then extend the
four leg extensions in the stand legs. Adjust each leg extension to
desired height, then tighten the thumbscrew to secure.
STEP 06
Place the gridle upright. Loosen the four (4) bolts on the
right side of the griddle body, then hang the side shelf on the bolts
and press down to lock the shelf in place. Retighten the bolts to keep
the side shelf stable.
Locking Pin
To Next Page
Loading...
