Blackberry CURVE 3G User Manual

n
To Wi-Fi using T-Mobile HotSpot:
Automatically connects to available Wi-
Fi networks when you are at a T-Mobile
HotSpot or T-Mobile partner location.
Your device can easily switch (while
not on a call) between saved Wi-Fi
networks, standard mobile phone
service, and T-Mobile HotSpot locations.
Your device will use the connection
with the best signal strength.
Step 1 - Set up a wireless router
If setting up a home Wi-Fi network,
set up the router using the
manufacturer’s instructions.
Step 2 - Set up Wi-Fi
1. From the Home screen,
press the Menu key.
2. Scroll to and select Manage
Connections.
3. Scroll to and select Set
Up Wi-Fi Network.
4. At the Set Up Wi-Fi
screen, select Next.
5. Select Scan For Networks.
6. If prompted, select Turn Wi-Fi on.
7. Scroll to and select the
desired network.
8. If prompted, enter a key or password.
9. Select Connect.
5. Press the Menu key.
6. Select Save.
Call a contact from the contacts list
1. From the Home screen,
select Contacts.
2. Scroll to the contact.
3. Press the green Send key.
WI-FI CALLING SETUP
Your device is HotSpot-enabled, allowing
you to connect to the network in three ways:
n
To standard mobile phone service
(cell towers):
Automatically connects to standard
mobile phone service when you
have coverage and whenever you
are not in range of a saved Wi-Fi
network or a T-Mobile HotSpot.
n
To Wi-Fi using an available home or
public Wi-Fi network:
Automatically connects to your
home Wi-Fi network after you set
up wireless router and save the
network to your device. Automatically
connects to public networks after you
save the network to your device.
13 14

Blackberry CURVE 3G Specifications

General

Brand	Blackberry
Model	CURVE 3G
Category	Cell Phone
Language	English