Menu Settings
The push button ‘menu’ dial allows you to enter the menu by pressing it, whilst rotating the
dial navigates up and down through the menu options. Pressing the ‘menu’ dial whilst a menu
heading is highlighted, will allow you to switch between the display, shortcuts, setup and cursor
sub menus. Rotating the dial will scroll through the settings in each menu. Pressing the dial
when a setting is highlighted allows you to adjust that setting by rotating the ‘menu’ dial.
Confirm your selection by pressing the ‘menu’ dial once more. You can exit out of the menu
by hitting the ‘back’ button or by navigating to and selecting exit.
Display
Zebra
Switches zebra levels on and off. The level of zebra will be determined by the setting
on your URSA Broadcast G2, in the third page of the ‘Monitor’ settings menu. When the
Studio Viewfinder is not connected with URSA Broadcast G2, the zebra level will
represent 95% of the luminance levels of a Rec 709 signal. For more information, refer
to the ‘settings’ section in this manual.
False Color
Switches the false color feature on and off. False color overlays different colors onto your
image that represent exposure values for different elements in your image. For example, pink
represents optimum exposure for skin tones. By monitoring the pink false color when recording
people, you can maintain consistent exposure for skin tones. Similarly, when elements in your
image change from yellow to red, that means they are now over exposed. False color is a good
feature to assign to one of the function buttons, as it provides quick and easy access to a
commonly used reference tool for exposure.
False Color Chart
150Blackmagic URSA Studio Viewfinder
To Next Page
Loading...
