Page 23
SET UP & USE
WARNING: Never run the dishwasher without the filters in place. The dishwasher
must never be used without the filters. Improper replacement of the filter
may reduce the performance level of the appliance and damage dishes
and utensils.
STEP 1: Rotate the filter
assembly(A,B and C)
counter-clockwise,
then lift it all up.
STEP 2: lift B and C up from A.
STEP 3: The End.
NOTE: If do it from step 1 to step 3, the filter system will be removed; while if do it
from Step 3 to Step 1, the filter system will be installed.
NOTE: Inspect the filters for blocking every time the dishwasher has been used
By unscrewing the coarse filter. You can remove the filter system. Remove any
food remnants and clean the filters under running water.
NOTE: The entire filter assembly should be cleaned once a week.
A
B
C
A
B
C
To Next Page
Loading...
