Black+Decker BEMW461BH - Protecting the Environment; Service Information

15
ENGLISH
Problem Possible cause Possible solution
Machine
leaves ragged
nish or mo-
tor labours.
Height of cut
too low.
Increase height of cut.
Cutting blade
blunt.
Replace the blade.
Underside
of machine
clogged.
Check underneath the
machine and clear out
as necessary (always
wear heavy duty gloves)
Blade tted
upside down.
Ret blade correctly.
Protecting the environment
Z
Separate collection. Products and batteries
marked with this symbol must not be disposed of
with normal household waste.
Products and batteries contain materials that can be
recovered or recycled, reducing demand for raw materials.
Please recycle electrical products and batteries according to
local provisions. Further information is available at
www.2helpU.com
Service Information
BLACK+DECKER offers a full network of company-owned
and authorized service locations throughtout Asia. All
BLACK+DECKER Service Centers are staffed with trained
personnel to provide customers with efcient and reliable
product service.
Whether you need technical advice, repair, or genuine factory
replacement parts, contact the BLACK+DECKER location
nearest to you.
NOTE
u BLACK+DECKER's policy is one of continuous
improvement to our products and, as such, we reserve the
right to change product specications without prior notice.
u Standard equipment and accessories may vary by country.
u Product specications may differ by country.
u Complete product range may not be available in all
countries. Contact your local BLACK+DECKER dealers for
range availability.