What to do if my Black+Decker Vacuum Cleaner steam mop is not turning on?
If your Black+Decker Vacuum Cleaner steam mop isn't turning on, there are a few things you can check: * Ensure the unit is properly plugged into the wall socket. * Verify that the unit is switched on using the ON/OFF switch. * Inspect the fuse in the plug to see if it needs replacing.
Why is my Black+Decker FSMH1321 Steam Cleaner not producing steam?
If your Black+Decker Steam Cleaner isn't producing steam, ensure the handheld steam cleaner is correctly docked into the main body, the steam hose is properly fitted, or the AutoselectTM is turned to ON. Also, make sure the water tank is full. Note that it can take up to 45 seconds for steam to be produced when first filled or after running dry.
How to fix Black+Decker Steam Cleaner that is not turning on?
If your Black+Decker Steam Cleaner is not turning on, check that the unit is plugged into the wall socket and switched on using the ON/OFF switch. You should also check the fuse in the plug.
Why is my Black+Decker handheld Steam Cleaner not producing steam?
If no steam is being produced from the handheld steam cleaner of your Black+Decker Steam Cleaner, check that the AutoselectTM dial is in the ON position.
How to reduce steam on Black+Decker Steam Cleaner?
If your Black+Decker Steam Cleaner is producing too much steam, turn the AutoselectTM dial anti-clockwise to reduce the amount of steam being produced.
How to decrease steam from Black+Decker handheld Steam Cleaner?
If the handheld steam cleaner of your Black+Decker Steam Cleaner is producing too much steam, turn the AutoselectTM dial anti-clockwise to reduce the amount of steam being produced.
How to increase steam on Black+Decker FSMH1321?
If your Black+Decker Steam Cleaner is producing too little steam, turn the AutoselectTM dial clockwise to increase the amount of steam being produced.
How to fix low steam on Black+Decker handheld Steam Cleaner?
If the handheld steam cleaner of your Black+Decker Steam Cleaner is producing too little steam, turn the AutoselectTM dial clockwise to increase the amount of steam being produced.
General| Power | 1300W |
|---|---|
| Cable Length | 6 meters |
| Model | FSMH1321 |
| Heat-up Time | 15 sec |
| Accessories | Carpet Glider |
| Product Type | Steam Mop |
| Run time | 15-20 minutes |
Covers safe handling, usage conditions, and avoiding hazardous environments.
Warns about specific floor types and recommends pre-testing.
Details precautions for operation, maintenance, and storage.
Warns against using certain products and operating in specific environments.
Alerts users to hot parts and potential steam escape.
Guides on safely shutting down and storing the appliance.
Details pre-use checks and procedures for damaged parts.
Outlines conditions for use by individuals with reduced capabilities and child supervision.
Lists potential risks from misuse or prolonged use despite safety measures.
Mandates earthing, voltage checks, and integrity of plugs/cords.
Details requirements and precautions for using extension cables.
Explains the meaning of cautionary pictograms found on the appliance.
Identifies main parts like switches, dials, and the handheld unit.
Identifies the floor cleaning head and steam hose.
Lists specific accessories like SteaMitt™, brushes, and squeegees.
Crucial safety warning before starting assembly: ensure power is off, unplugged, and unit is cool.
Instructions for attaching the handle and handheld steam unit.
Guides on how to properly attach a cleaning pad to the floor head.
Instructions for safely removing a used cleaning pad.
Safety advice to wear suitable shoes and handle with care.
Specifies using clean tap water and notes the tank capacity.
Details safe filling steps, including detaching and not overfilling.
Instructions for fitting and detaching the carpet glider accessory.
Describes the delta head for corners and safe operation.
Steps for attaching and reattaching the delta head.
Steps to connect the steam hose to the handheld unit.
Instructions for aligning and attaching accessories to the steam nozzle.
Emphasizes secure connections and troubleshooting steam leaks.
Safety warning to allow hot components to cool before removal.
Procedures for removing accessories and the steam hose.
Describes the SteaMitt™ accessory for sanitizing surfaces.
Instructions for connecting the SteaMitt™ hose, including seal inspection.
Steps to attach the cleaning pad to the SteaMitt™, detailing pad types.
Crucial safety warnings for using SteaMitt™, including no pad, grip, corners, and pointing.
Highlights germ killing and using Autoselect™ with SteaMitt™.
Instructions for powering on/off and general usage advice.
Detailed instructions for steam cleaning using the mop attachment.
Caution on monitoring water level and safe refilling procedures.
Steps for setting up and operating the mop for carpet refreshing.
Guides on turning off, unplugging, and storing the steam mop.
Instructions for connecting and operating the detachable handheld steam unit.
Procedures for safely turning off and storing the handheld unit.
Discusses the role of high-quality accessories in appliance performance.
Presents technical specifications for various steam mop models.
Provides instructions on how to wash and care for the cleaning pads.
Details the steps for replacing the mains plug.
Covers plug wiring, fuse, and safety advice for replacement.
Information on environmentally responsible disposal and recycling.
Guides on resolving issues related to power and steam generation.
Guides on resolving issues with too much or too little steam.
Guides on resolving steam leaks and accessories falling off.
Provides general guidance on appliance care and minimum maintenance.
Instructions for cleaning the steam mop using a damp cloth.
To Next Page
