Blackstar Studio 10 KT88 User Manual

11
Owner’s Manual
Blackstar Amplification Ltd, Beckett House, 14 Billing Road, Northampton, NN1 5AW, UK
For the latest information go to: www.blackstaramps.com
Whilst the information contained herein is correct at the time of publication, due to our policy of constant improvement
and development, Blackstar Amplification Ltd reserves the right to alter specifications without prior notice.
Designed and Engineered by
Blackstar Amplication UK
134400M-VE 09/18

Blackstar Studio 10 KT88 Specifications

General

Power Output	10W
Channels	1
Effects	Reverb
Effects Loop	Yes
Footswitch Included	No
Type	Tube Amplifier
Tube Type	KT88
Speaker	1 x 12"
Controls	Gain, Tone
Inputs	1 x 1/4"
Outputs	1 x 1/4" (Speaker)
Footswitch I/O	1 x 1/4"

Summary

Important Safety Instructions

General Safety Warnings and Symbol Explanations

Covers essential safety notices, electrical hazard warnings, and explanations of safety symbols used in the manual.

OSHA Noise Exposure Guidelines

Permissible Noise Level Exposures Table

Details the US Government's OSHA limits for noise exposure over time, recommending hearing protection.

Key Features and Design

Amplifier Tone and Construction

Highlights the amplifier's modern-voiced, single-ended Class A valve design, KT88 power valve, and Celestion speaker.

Front Panel Controls

Rear Panel Connections

Mains Fuse and Input

H.T. Fuse Location

Speaker Output Options

Details the 1x16 Ohm and 1x8 Ohm or 2x16 Ohm speaker output options and impedance matching.

Speaker Emulated Output

Technical Specifications

Amplifier Technical Details

Lists key technical details including power, valves, weight, dimensions, and footswitch compatibility.