17
USER MANUAL
1. Attaching double-sided adhesive tape 2. Installing unit
Wipe up the foreign matters or moisture completely
from the location of installation. Remove the
release paper on double sided tape and attach it
to the cradle part of holder and remove the red
adhesive protector.
Installation is recommended on the left/right of room mirror.
Tightly fasten the adhesive of holder to the windshield by
pushing it. Adjust the angle of camera to record forward and
unit to be vertically installed. Finally, tighten the clamping
lever.
※ If a video from navigation system or dashboard reflect in windshield,
it could affect video quality.
04 Installation
4-1 Front Camera (Main product)
To Next Page
Loading...
