38
CAMMSYS BLACKBOX
07 How to format SD card
7-1 PC format
1.PC format
※ “How to format?” is provided from PC viewer. We do not recommend to format on “My Computer”.
① Insert or connect SD card to PC.
② Click [Start] → [My Computer]
③ Place mouse pointer on [Portable USB drive] SD card and click the right button of mouse. Then click the [Format]
④ Once click the [Start] button, format is started.
• FAT 32 format is required if SD card recognition and record error happen.
Product will format SD card automatically in case of using 32KB cluster size format.
• Change SD card if PC doesn’t recognize SD card or format is not able to be completed.
• If SD card contains other data, it can cause malfunctioning. Therefore, please remove it.
※ As SD card is expendable supply, manufacturer is not responsible for any data loss and damage.
Also, manufacturer cannot guarantee the recorded data in SD card.
2.Format PC viewer
① Click “Configuration”
② Click “SD card format”. (Refer to P. 30 Configuration)
7-2 Format on product
※ Formatting SD card is also possible on the product.
① Press Event + WiFi button for 3sec. then it will give voice guide “Formatting is on standby. Press the left key to format”.
② Press Event button again then format will be started with voice guide “Formatting SD card. Do not turn off the power”.
③ It will start recording automatically once the format is done.
To Next Page
Loading...