EasyManua.ls Logo

BlackSys CH-200 - Page 22

BlackSys CH-200
44 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
22
CAMMSYS BLACKBOX
4. Normal Recording
- Normal recording : Recording starts when vehicle power is turned on and recorded data are stored in SD card. (“AlwaysMovie” folder)
- Event recording : Recording starts if acceleration sensor(G-sensor) detects impact, sudden unintended acceleration and quick braking,
it records 30 sec. of video to the “EventMovie” folder 10 sec. before and 20 sec. after the event.
- Manual recording : Recording starts if user manually pressed the event button during the car runs, it records video
(“EventMovie” folder)10 sec. before and 20 sec. after the event.
※ While Event Recording, Manual recording function cannot be operated and during Manual recording, Event recording also cannot be operated.
5. Parking Mode Recording
- Paring mode is active when the product power is ON.
※ Note that recording and the product itself will terminate power if the vehicles’ battery drops below a predetermined voltage.
- Parking Mode Setting : The product can be programed with a set time to initiate the ‘auto conversion to parking mode’ function.
When the product converts to parking mode, a voice segment (“Switched to parking mode”) is announced.
※ Automatic conversion to parking mode can be programed in the Configuration Setting >> Basic Functions of the BlackSys viewer,
or on the BlackSys mobile app : BlackSys Settings >> Basic Function.
※ As recording stops and converts to parking or driving mode, less than 5 seconds of video may be lost.
- Recording in Parking mode “Motion” LED segment will be displayed on lower part of the screen when saved video playing.
※ When converting from normal, event, or manual recording mode to parking mode, each recorded file is terminated and converted into parking mode.
For this reason, video loss can occur.
- When selecting ‘Use motion detection’ in the configuration settings, video will be recorded for 30 seconds in total when motion is
detected - 10 sec. before / 20 sec. after. Files will be saved in the “MotionMovie” folder.
※ For efficient memory management only the rear/front camera that detects the motion will activate.

Related product manuals