CHANNEL LOCK
Use this feature to lock a device to the remote’s channel control. For example,
the remote can be in TV mode while the channel buttons control your
satellite or cable box.
Enabling Channel Lock:
1. Press and hold the button until the button lights up red.
The button’s red indicator light remains on.
2. Select a device from Device Categories that you want to lock to the
remote’s channel control. The button’s red indicator light blinks
once and remains on.
3. Press the CH+ button. The button’s red indicator light blinks once
and remains on.
4. Press the
OK
button. The button’s red indicator light will blink twice
and turn off.
Disabling Channel Lock:
1. Press and hold the button until the button lights up red.
The button’s red indicator light remains on.
2. Press the CH- button. The button’s red indicator light blinks once
and remains on.
3. Press the
OK
button. The button’s red indicator light will blink twice
and turn off.
NOTE: On most newer HDMI-connected devices, the Channel Lock feature
may be unnecessary as this feature is already built-in.
PROGRAM
PROGRAM
12
To Next Page
Loading...
