Blade Nano QX2 FPV User Manual (English)

Questions and Answers:

V
vsinghAug 13, 2025
What to do if the LED flashes rapidly and my Blade Quadcopter doesn't respond after binding?
- E
  Edward Kline DDSAug 13, 2025
  If the LED on the receiver flashes rapidly and your Blade Quadcopter doesn't respond to the transmitter after binding, there might be several reasons: * Less than a 5-second wait between powering on the transmitter and connecting the flight battery (leave the transmitter powered on, disconnect and reconnect the flight battery). * The quadcopter is bound to a different model memory (if using ModelMatch™ transmitters, select the correct model memory, then disconnect and reconnect the flight battery). * Flight battery or transmitter battery charge is too low (replace or recharge batteries). * The aircraft or transmitter is too close to a large metal object, wireless source, or another transmitter (move them to another location and try connecting again).
P
Paula ThompsonAug 17, 2025
Why is the LED flashing rapidly and my Blade Quadcopter not responding to the transmitter during binding?
- F
  Frank KennedyAug 17, 2025
  If the LED on the receiver flashes rapidly and the Blade Quadcopter won't respond to the transmitter during binding, it could be due to: * The transmitter being too close to the aircraft (power off the transmitter, move it further away, disconnect and reconnect the flight battery, and follow the binding instructions). * The bind switch or button not being held while the transmitter was powered on (power off the transmitter and repeat the bind process). * The aircraft or transmitter being too close to a large metal object, wireless source, or another transmitter (move them to another location and try binding again).
B
Brenda BrownAug 20, 2025
Why is my Blade Quadcopter flight time reduced?
- I
  ihallAug 20, 2025
  Reduced flight time or underpowered Blade Quadcopter can be due to several factors: the flight battery charge may be low (completely recharge it), there may be inadequate power to the flight battery charger (use a different USB power source), the flight battery may be damaged (replace it and follow the instructions), flight conditions might be too cold (ensure the battery is at room temperature before use), or one or more propellers are fouled (clean any pet hair, lint, or grass away from the base of the propellers).
C
Chris ClarkAug 25, 2025
What to do if my Blade Quadcopter will not respond to throttle?
- P
  Paige SmithAug 26, 2025
  If your Blade Quadcopter doesn't respond to the throttle, it could be due to a few reasons: * The throttle or throttle trim is too high (reset controls with both at the lowest setting). * The quadcopter moved during initialization (disconnect the flight battery and re-initialize while keeping it still). * The throttle channel is reversed (disconnect the flight battery, reverse the throttle channel on the transmitter, and reconnect the flight battery).
D
David MartinAug 28, 2025
How to fix inconsistent control response on Blade Nano QX2 FPV?
- J
  Jonathon WoodAug 28, 2025
  Inconsistent control response or the need for extra trim on your Blade Quadcopter can be caused by: * The aircraft not being initialized on a level surface (disconnect the flight battery, center the control trim, and re-initialize the quadcopter). * The battery not being correctly placed in the battery slot (adjust the battery position so the quadcopter balances in the center of the frame).
J
Joseph ColemanSep 1, 2025
How do I remove static from my Blade Quadcopter FPV feed?
- S
  Steven RussellSep 1, 2025
  To remove static from your Blade Quadcopter FPV feed: * Change the video transmitter and receiver channel. * Avoid flying too close to a 5.8 GHz WiFi source, either remove the WiFi source or move to a different flying area.
S
stephanieperezSep 4, 2025
What to do if my Blade Quadcopter smells burnt and doesn't function after connecting the battery?
- J
  joseph43Sep 4, 2025
  If your Blade Quadcopter smells burnt and doesn't function after connecting the flight battery, it's likely the flight battery was connected with the wrong polarity. Replace the 4-in-1 board, and connect the flight battery noting the proper polarity.
K
kristen40Sep 8, 2025
Why does my Blade Quadcopter crash immediately upon lift-off?
- J
  James McclainSep 8, 2025
  Your Blade Quadcopter might crash immediately upon lift-off if the propellers are in the wrong locations or if the incorrect flight mode is selected. Make necessary adjustments.

Blade Nano QX2 FPV Specifications

General

Type	Quadcopter
Motor Type	Brushed
Battery Discharge Rate	25C
Charging Time	30-40 minutes
Controller Frequency	2.4GHz
Stabilization	SAFE technology
FPV Camera	25mW
Flight Modes	Stability and Agility
Camera	FPV camera