5
Technical Data
220-240V AC/380-415V AC 50/60 Hz
Burner
Specifications
Gas Natural
1.00kPa
ULPG
2.75kPa
Wok Burner
Injector 1.60 mm Injector 0.92 mm
Gas flow 0.318 m³/h Gas flow 242 g/h
Power 12.00 MJ/h Power 12.00 MJ/h
Rapid Burner
Injector 1.55 mm Injector 0.90 mm
Gas flow 0.318 m³/h Gas flow 211.7 g/h
Power 11.00 MJ/h Power 11.00 MJ/h
Semi-Rapid Burner
Injector 1.20 mm Injector 0.70 mm
Gas flow 0.185 m³/h Gas flow 141 g/h
Power 7.00 MJ/h Power 7.00 MJ/h
Auxiliary Burner
Injector 0.90 mm Injector 0.50 mm
Gas flow 1.00 m³/h Gas flow 76.3 g/h
Power 3.80 MJ/h Power 3.30 MJ/h
Note: Diameter values written on the injector are specified without a decimal point. For example; a
diameter of “1.70 mm” is specified as “170” on the injector.