13
EN
7/ LOADING OF RINSING PRODUCT
Important :
Only use a rinsing product designed for
dishwashers. The rinsing product ensures
your items shine and are well dried.
When first putting the machine into
service, fill the tank until the level is flush with
the top of the adjustment lever. Pour in at least
all the rinsing product provided.
The tank contains 120 ml (approximately one
glass)
The original setting is in the centre (middle
position: reference mark 2). If you encounter
marks or poor drying after a few cycles, you
can adjust the setting using the adjustment
lever
(fig 07
;
Reference mark 3 will
increase the setting).
- Close the tank lightly
••
Rinsing liquid indicator light:
This illuminates when rinsing product is
required.
It can be deactivated as shown in the para-
graph “For multi-purpose products” setting
table.
Important :
If any of the product overflows during
filling, sponge up the excess to avoid pro-
ducing foam.
CC
BBAA
• Loading of rinsing product (Fig. 07)
Adjustment lever
Fig. 07
To Next Page
Loading...
Need help?
General
