EasyManua.ls Logo

Blanco BSD9X - Cleaning and Maintenance; Cleaning Waste Filters

Blanco BSD9X
30 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
21
EN
12/ CLEANING YOUR APPLIANCE
Fig. 15
The filtration system consists of several
elements:
--
The waste filter
--
The large main filter
--
The micro filter
The filters are located in the centre of the tub
and must be washed regularly to obtain opti-
mum washing results.
Actions :
Before removing the filters, remove any
waste on the large main filter with a
sponge so that the waste does not block the
sprinkler arms. Rotate the spray arm as
shown in the drawing. (Fig. 14)
Loosen the waste filter a quarter of a turn
and then remove it
Remove the main filter
Remove the micro filter
Carefully clean filters
,
and
under running water (Fig. 15)
Re-installation:
Proceed in reverse order, inserting filters
and and then
Important :
Remember to lock the waste filter
in place by pushing it in fully and turning it a
quarter turn.
AA
AABB
CC
CCBBAA
CC
BB
AA
BB
CC
BB
AA
• CLEANING THE WASTE FILTERS
Fig. 14
AA
BB
CC
AA
CC
BB
AA BB CC

Related product manuals