7
EN
2/ DESCRIPTION OF YOUR APPLIANCE
• PRESENTATION OF THE CONTROL PANEL
On/Off:
Press this button to start your dishwasher.
Choosing a programme:
Press this button to select a programme.
AUTO:
Press this button to select an automatic pro-
gramme.
Set :
Set the water softener.
(Depending on the water softener setting on
the following pages).
Delayed programme start
Press this button to delay the programme by 1
to 12 hours.
Start/Cancel:
Briefly press this button
to start your programme.
If you make an error, to cancel a selection or
cancel a programme while it is running, hold
down this button for 3 seconds.
The indicator lights:
SSaalltt::
When lit, it indicates lack of regenerating salt
Rinsing liquid:
When lit, it indicates lack of rinsing product
Multi-purpose products:
lit; shows you that the “4/1” feature is turned
on and that the programmes are now automa-
tically adjusted if a multi-function tablet is
used.
In progress:
lit; indicates that your programme is running.
FF
EE
DD
CC
BB
AA
Advice:
A short audible signal (beep) confirm the button’s selection, except for the “On/Off” button.
To Next Page
Loading...
Need help?
General
