USE
5
Switching off one burner
Touch the + and the - button of the burner you want to switch off simultaneously
for 2 seconds or use the - button to set the burner to 0.
The burner switches off and above the touch control a blinking ‘H’ appears for
some minutes to indicate that the burner is still hot.
Switching off all burners at the same time
Touch the On/Off button.
The hob is now switched off. If a burner is still hot, a blinking ‘H’ will appear for
some minutes in the display of the corresponding burner.
PROGRAMMABLE TIMER
It’s possible to set a switch-off time for each burner, so the burner switches off
automatically when the set time has passed. You can only set the switch-off time if
the burner is ignited.
●The countdown starts as soon as the programming of the switch-off time for a
burner has been confirmed. If you do not confirm the set time, the countdown will
start after several seconds.
●The set switch-off time for each programmed burner can be seen in the timer
display (after the right burner has been selected).
●If the time has elapsed, the burner switches off and you will hear a beep several
times during 30 seconds.
Programming the burner switch-off time
●Switch on the hob, ignite a burner and set the power.
●Touch the timer button.
An indicator above the timer button will start blinking to indicate the burner that is
currently selected for programming the switch-off time. With the timer button you
can select each burner that has been ignited. In the display ‘t0.00’ appears to
indicate that a time has not been set yet for the selected burner.
●Touch the + button of the timer to set the switch-off time for the selected burner
(increases by 1 minute).
●Touch the timer button again to confirm the setting.
Above the timer button the indicator lights of burners that are linked to a timer
will stay illuminated.
●During programming you can set the time to ‘0.00’ by touching simultanously the
+ button and the - button of the timer.
●You can see the remaining switch-off time for a burner by touching the timer
button again. The time of the burner which indicator light is blinking appears in
the display. If you want to see the remaining switch-off time of another burner,
you have to touch the timer button again to select a different burner.
●You can adjust the time by touching the timer button and selecting the correct
burner with the timer button. With the + button and the - button of the timer you
can adjust the time.
●If you switch off the burner, the programmed switch-off time dissappears.
To Next Page
Loading...
Need help?
General
