938375V2APK1/1-0321
6
Any changes in body weight and/or activity level of the user must also be reported to the
practitioner.
High exion resistance settings may induce some noise during stairs descent, this will not aect
function.
Any changes in performance of this device must be reported to the practitioner.
Changes in performance may include:
• Increase or decrease in knee stiness
• Instability
• Reduced knee support (free movement)
• Any unusual noise
• Any unrecognized beeps or warning lights
The practitioner must also be informed of the following:
• Any changes in body weight and/or activity level
• Signicant wear or excessive discoloration from long term exposure to UV
Cleaning
Use a damp cloth and mild soap to clean outside surfaces, DO NOT use aggressive cleansers.
Thoroughly dry before use.
To clean the magnetic mating surfaces of the charging connector and charging terminal use a
clean and dry cotton swab or a soft bristle brush. Make sure that no cotton bers or bristles are
left on the surfaces.
Never apply water or any other cleaning liquid to the magnetic mating surfaces.
Environment
Avoid exposing the device to corrosive elements such as water, acids and other liquids. Also
avoid abrasive environments such as those containing sand for example as these may promote
premature wear.
The charging surfaces of the connectors should be kept
away from other magnetic or conductive materials.
Exclusively for use between -10˚C and 50˚C
(14˚F to 122˚F).
4 Key Points
The device must not be used with large variations in heel height.
Do not attempt stairs descent leg-over-leg on this device unless you have been trained
for stairs descent.
To Next Page
Loading...