BLAUBERG Calm - Sensor and Timer Adjustment; Adjusting Timers and DIP Switches

12
TIME AND HUMIDITY SENSOR ADJUSTMENT
The control circuit board is under mains voltage!
Disconnect the fan from power mains prior to adjustment operations!
The fan delivery set includes a specially designed plastic screwdriver for
fan settings adjustments.
Calm You can use the screwdriver to change the turn-on (only 150 and
Max 150 models) and turn-off delay timer settings and to set the Calm
DIP switch into a required position (only 150 and Calm
Max 150 models). Calm
Do not use a metal screwdriver, knife, etc. for adjustment operations
not to damage the circuit board.
Calm 100/125
Calm 150/Calm Max 150
+
-
2 min
0 min
Ton
+
-
2 min
30 min
Toff
+
-
2 min
30 min
Toff
-
60%
90%
H
+
-
60%
90%
H
+
ON
1
2
3
4
DIP
Fig. 26