11
Image playback from USB or audioSDHC
쏅 Select the desired source via the main menu.
The device changes to the desired source and the
playback starts.
If the playback does not start with the image playback,
쏅 press the
button to change to the folder/file list.
쏅 Press the
button to display all the folders and
files of the data carrier.
- Or -
쏅 Press the
button to display all the images of
the data carrier.
Note:
Folders and images are selected and started as de-
scribed under audio playback.
Bluetooth mode
The Bluetooth® function allows registering cell phones
and media playback devices with the car sound system.
When you register a cell phone with the car sound sys-
tem, you can make phone calls with the built-in hands-
free function. You can access the lists of dialled numbers
and the phone book of the registered cell phone.
If the connected Bluetooth® device supports the func-
tions A2DP and AVRCP, you can play the music via the
car sound system and control the playback. During a call,
the music playback is interrupted and continued again
after the call.
If a cell phone is registered via Bluetooth® and a call is re-
ceived during the playback of another source, the source
playback is interrupted and the call menu is displayed.
Starting Bluetooth mode
쏅 In the main menu, press on Bluetooth .
- Or -
쏅 Press the MENU button
2
for approx. 2 seconds.
The Bluetooth® menu is displayed. It contains the list
of known Bluetooth® devices. Other audio sources
are switched o .
[ ] Add new Bluetooth® device.
[
] Display options menu.
쏅 Press the Connect button of the Bluetooth® de-
vice with which you want to establish a connection.
When the device is in range, the connection is estab-
lished and the menu for the device is displayed.
쏅 Press the Delete button if you want to delete the
Bluetooth® device from the list.
Registering Bluetooth devices
If you want to register a device with the car sound system
for the rst time, proceed as follows:
쏅 Ensure that Bluetooth® is activated at the car sound
system and at your Bluetooth® device.
쏅 In the options menu of the Bluetooth® mode, enter a
pairing code (see Bluetooth® settings).
쏅 Search for new devices/connections on your Blue-
tooth® device.
쏅 The car sound system appears as "BP 330" in the list
of Bluetooth® devices.
쏅 Establish the connection; you may have to enter the
pairing code that was previously entered on the car
sound system.
The connection is being established and the menu
for the registered device is displayed.
Note:
If a telephone is connected with the car sound sys-
tem, the Bluetooth® icon
is displayed at the top
right edge of the display in all audio/video sources.
USB/microSDHC media playback | Bluetooth mode
To Next Page
Loading...
Need help?
General
