EasyManuals Logo

Blaupunkt 330 SERIES User Manual

Blaupunkt 330 SERIES
18 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #14 background imageLoading...
Page #14 background image
14
Equalizer
You can adjust the equalizer for all sources.
In the main menu, press the EQ button.
- Or -
On the control bar of the current audio source, press
the
button.
The equalizer menu is displayed.
Select a preset equalizer via the buttons.
- Or -
Press the User button to adjust the level of the
available frequency bands according to your prefer-
ences.
Note:
With the [ Reset ] button, you can reset the custom-
ised setting again.
- Or -
Press the Flat button for a linear sound playback.
Press the Loudness button to switch increasing
the bass at low volume on or o .
Next, press
.
The setting is stored, the current source is displayed
again.
Note:
You also have the option of setting the equalizer
using three frequency bands. In the equalizer menu,
press the button [
] and perform the setting
as described.
Sound settings | Basic settings
Basic settings
In the settings menu, you can adjust the basic settings
for the di erent functions of the device to your require-
ments.
In the main menu, press the [ Settings ] button.
The settings menu is displayed, the General sub-
menu is activated.
Call up the submenus with the buttons in the lower
area of the settings menu.
General
The following settings are possible:
Radio region – Select the reception region for the radio
reception.
FM HICUT – Activating/deactivating the Hicut  lter
to improve playback in case of poor radio reception.
Blackout – If this value is set, the display of the radio is
completely switched o after 10 or 20 sec. without use.
Dimmer mode – Adjust the display brightness
OFF timer – Setting the switch-o time. To protect the
vehicle battery, the device is automatically switched o
after the set time period if the vehicle ignition is switched
o .
Beep – Switch con rmation beep on/o
TFT calibrationThe touchscreen can be calibrated
here.
SWCThe buttons of a connected steering wheel con-
trol can be con gured here.
Software version – Display of the current software ver-
sion.
Load factory settings – Resets all personalised settings.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Blaupunkt 330 SERIES and is the answer not in the manual?

Blaupunkt 330 SERIES Specifications

General IconGeneral
BrandBlaupunkt
Model330 SERIES
CategoryCar Video System
LanguageEnglish

Related product manuals