EasyManua.ls Logo

Blaupunkt 7 647 482 310 - CD Playback Features; Track Selection and Navigation; Audible Fast Searching; Random Track Play (MIX)

Blaupunkt 7 647 482 310
26 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
40
Notes:
The CD symbol indicates that a CD is
located in the drive.
A border surrounding the CD symbol
indicates that CD is selected as au-
dio source.
If the vehicle ignition was switched
off prior to inserting the CD, you
must switch in on fi rst with the but-
ton 2 to start the playback.
If a CD is already inserted in the drive,
press the SRC/
button > repeated-
ly until "CD" appears on the display.
Playback begins from the point at which it
was last interrupted.
Selecting tracks
Press one of the arrow buttons 6 to
select the next or previous track.
If you press the
or button 6 once, the
player will play the current track again from
the beginning.
Fast track selection
To quickly select tracks backwards or for-
wards,
press and hold down one of the
buttons 6 until fast-reverse / fast-for-
ward track selection begins.
Fast searching (audible)
To fast search backwards or forwards,
press and hold down one of the
buttons 6 until fast searching back-
wards / forwards begins.
Random track play (MIX)
Press the 5 MIX button <.
"MIX CD" appears briefl y on the display
and the MIX symbol lights up. The next ran-
domly selected track will then be played.
Cancelling MIX
Press the 5 MIX button < again.
"MIX OFF" appears briefl y on the display
and the MIX symbol disappears.
Scanning tracks (SCAN)
You can scan (briefl y play) all the tracks on
the CD.
Press and hold down the MENU button
: for longer than two seconds.
The next track will then be scanned.
Note:
You can set the scanning time. For
further information, please read the
section entitled "Setting the scanning
time" in the "Radio mode" chapter.
Cancelling SCAN and continuing
listening to a track
To stop scanning, press the MENU but-
ton :.
The currently scanned track will then con-
tinue to be played normally.
Repeating tracks (REPEAT)
If you want to repeat a track,
press the 4 RPT button <.
"RPT TRCK" appears briefl y on the display
and the RPT symbol is displayed. The track
is repeated continuously until you deacti-
vate RPT.
CD mode
02MadeiraPortoCD27_gb.indd 4002MadeiraPortoCD27_gb.indd 40 26.10.2006 16:08:40 Uhr26.10.2006 16:08:40 Uhr

Table of Contents

Related product manuals