Blaupunkt 7 647 482 310 - Clock Functions; Displaying the Time; Setting the Time; 12;24-Hour Clock Mode Selection

44
CLOCK time
Displaying the time
To briefl y display the time,
press and hold the SRC/
button >
until the time appears on the display.
Setting the time
To set the time,
press the MENU button :.
Press the
or button 6 repeat-
edly until "CLOCK SET" appears on the
display.
Press the
button 6.
The time appears on the display. The hours
fl ash and can be adjusted.
Adjust the hours with the
buttons
6.
Once the hours are set,
press the
button 6.
The minutes fl ash.
Adjusts the minutes with the
but-
tons 6.
Press the MENU button : twice.
Selecting 12/24-hour clock
mode
Press the MENU button :.
The display shows "MENU".
Press the
or button 6 repeated-
ly until "24 H MODE" or "12 H MODE"
appears on the display.
Press the
or button 6 to switch
between the modes.
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
When you have fi nished making your chang-
es,
press the MENU button :.
Displaying the time continuously
when the device is off and the
ignition is on
To display the time when the device is off
and the vehicle ignition is on,
press the MENU button :.
The display shows "MENU".
Press the
or button 6 repeatedly
until "CLOCK OFF" or "CLOCK ON" ap-
pears on the display.
Press the
or button 6 to switch
the display between ON and OFF.
When you have fi nished making your chang-
es,
press the MENU button :.
쏅
쏅
쏅
쏅
쏅
CLOCK time
02MadeiraPortoCD27_gb.indd 4402MadeiraPortoCD27_gb.indd 44 26.10.2006 16:08:41 Uhr26.10.2006 16:08:41 Uhr