EasyManua.ls Logo

Blaupunkt BUENOS AIRES 200 7 649 020 110 - Storing Stations;Calling Stored Stations; Storing Stations Automatically (Travelstore); Switching Traffi C Information Priority On;Off; Confi Guring the Display

Blaupunkt BUENOS AIRES 200 7 649 020 110
140 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
25
ENGLISH
Radio mode
Setting the language for programme types
You can select the language in which the pro-
gramme types should be displayed.
Briefl y press the MENU
button ? to open
the PTY menu.
Briefl y press the DISP button < to open the
language menu.
If necessary, press the button AM
=/
FM > repeatedly until the desired lan-
guage (ENGLISH/FRENCH/GERMAN) is dis-
played.
Briefl y press the
DISP button <.
Briefl y press the MENU
button ? to exit the
PTY menu.
Storing stations/Calling stored
stations
Select the desired memory bank.
If necessary, set the desired station.
Press the station button
1 - 6 ; for approx.
2 seconds to store the current station under
the button.
- or -
Briefl y press the station button
1 - 6 ; to
call up the stored station.
Storing stations automatically
(Travelstore)
With Travelstore, 6 stations each of the region are
stored in the current memory bank. Any previous-
ly stored stations in this memory bank are deleted
in the process.
To start the Travelstore function, select the
"A-MEMORY" menu item in the user menu (see
the chapter "User settings", section "Performing
settings in the user menu").
Note:
If the priority for traffi c information is acti-
vated (
), only traffi c information stations
are stored.
Switching traffi c information priority
on/off
Press the FM button > for approx. 2 sec-
onds to switch the priority on or off.
If priority is switched on, the display shows the
traffi c jam symbol (
). "TRAFFIC" is displayed
during a switched-through traffi c announcement.
Notes:
The volume that you adjust during a traffi c
announcement is automatically set for sub-
sequent announcements.
To cancel a switched-through traffi c an-
nouncement, press the
FM button >
for approx. 2 seconds.
Confi guring the display
Press the DISP button < once or twice to
change between these displays:
Display Meaning
FREQ/PS
Frequency/station name
R-TEXT
Radio text
CLOCK
Time
Press the
DISP button < for approx.
2 seconds to show the displayed text once as
scrolling text.
02_BuenAir200_Stock100_gb.indd 2502_BuenAir200_Stock100_gb.indd 25 03.12.2008 13:18:01 Uhr03.12.2008 13:18:01 Uhr

Table of Contents

Related product manuals