15
FRANÇAIS
ENGLISH
ESPAÑOL
PORTUGUÊS
Note:
● The lengths of these samples can
be set. Please consult the section
on “Setting Scan Time” under “Ra-
dio Operation”.
Pausing During Play
➮ Press button 2 ( ) >.
“PAUSE” appears in the display.
Continuing after the pause
➮ Press button 2 ( ) > again.
Play resumes.
CLOCK - Time
Displaying the Time
To display the time
➮ Press the button ? briefly.
Setting the Time
➮ Press the MENU button =.
➮ Press the or button < until
“CLOCKSET” appears in the dis-
play.
➮ Press the button <.
The time is shown in the display.
The minutes are blinking, and can be
adjusted.
➮ Adjust the minutes with the or
button <.
Having set the minutes
➮ Press the button <.
The hours blink.
➮ Adjust the hours with the or
button <.
When the time setting procedure is com-
plete
➮ Press the MENU button = twice.
Choosing 12/24 Hour Clock
Mode
➮ Press the MENU button =.
“MENU” appears in the display.
➮ Press the or button < until
“24 H MODE” or “12 H MODE” ap-
pears in the display.
➮ Press the or button < to
switch modes.
CLOCK - TIMECD CHANGER OPERATION
To Next Page
Loading...
