Blaupunkt Ft.Lauderdale 900 - Device Operation Basics; Power, Volume, and Mute; Main Menu Navigation

06
Placing the device in operation
Switching ON/OFF with the POWER button
• Toswitch-ON,pressthe[ ] button.
• Toswitch-OFF,holdthe[ ] button pressed for more than 2 seconds.
Volume
Adjusting the volume
You can adjust the volume in steps from 0 (o) to 40 (maximum).
Pressthebutton[ +]toraisevolumeand[ – ] button to lower the volume.
Muting the car sound system (Mute)
Brieypressthe[ ] button to mute the device or to reactivate the previous volume.
Main menu(Home)
In the main menu, press the buttons on the touchscreen to call up the dierent
sources and operating modes.
• Inthecurrentsource,pressthe[ ] button.
The main menu is displayed.
1. Enter main menu
2. Top bar: Drag down to see more
functions
3. Now Playing source
4. Back
5. Enter Radio menu
6. Enter Android Auto menu
7. Enter Apple CarPlay menu
8. Enter Settings menu
• Swipe left on the screen to see more
source icons.
Note:
The gures used in these instructions are
intended to facilitate the explanations
and details may deviate from your device.
Radio mode
Start radio mode
In the main menu, press the [Radio ]
button. The radio playback menu is
displayed.
Select memory bank
Dierent memory banks and wavebands
are available. Up to 6 stations can be
stored in each memory bank.
• Pressthe[BAND ] button repeatedly until the desired memory bank is displayed.
Tuning into a station
Tuning into stations manually
• Brieypressthe[ ]or[ ] button to change the frequency in increments.
• You can select broadcast fequency directly by dragging the red " | " in the
frequency.
Placing the device in operation | Radio
1
5 6 7 8
2 43