DANSK
17
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKAESPAÑOL
PORTUGUÊS
FITTING/REMOVAL
Check and adjust the monitor
then apply the Velcro strips
➮ Connect the monitor, place it tem-
porarily in the cut-out, and place
the headrest into position.
➮ Check the various monitor settings
such as brightness, headphone
function, volume control and so on.
➮ Then attach the Velcro strips to the
rear of the monitor, and push the
frame onto the headrest.
Take care not to press the screen
itself, and apply pressure only in
the region of the frame.
Removal
➮ To remove the screen, insert the
extraction tool between the screen
and the mounting plate.
➮ Insert the extraction tool at the
place where a slot has been pro-
vided between the screen and the
mounting plate.
Extraction tool
To Next Page
Loading...
Need help?
General
