Blaupunkt IVTV-05 - Setting TV Sound Signal

68
Setting the TV sound signal
You can select whether the IVTV-05 outputs the sound signal as mono or
stereo.
1. Press the Menu button on the remote control.
E The menu of the IVTV-05 is displayed.
2. Move the selection mark with the M or N button to the Setup menu item and press
the OK button.
E The Setup menu is displayed.
3. Move the selection mark with the N button to the TV Configuration menu item and
press the OK button.
E The TV Configuration menu is displayed, the TV Format menu item is selected.
4. Move the selection mark with the N button to the TV audio signal menu item.
5. Press the O or P button repeatedly until the desired sound signal is displayed.
6. Press the OK button.
E The Setup menu is displayed again.
7. Press the Menu button to return to the menu. Press the button again to exit the
menu.
Configuration
Menu
EXIT MENUOK
Favourites lists
New channels
User preferences
Setup
System information
Delete channel
Setup
EXIT MENUOK
Channels installation
TV Configuration
Time Settings
Reinstallation
TV Configuration
OK
4:3 Letter box
PAL
Stereo
TV Format
TV output signal
TV audio signal
TV Configuration
OK
4:3 Letter box
PAL
Stereo
TV Format
TV output signal
TV audio signal
2_BA_IVTV_05_gb.indd 68 03.02.2006 8:34:07 Uhr