48
Setting the volume for the
warning tone (beep)
If you hold down a button for longer than two
seconds when using certain functions, e.g.
storing a station on a station button, a warn-
ing tone (beep) sounds. The volume of this
beep is adjustable.
➮ Press the MENU button 8.
➮ Press the soft key 4 with the display
allocation “VAR”.
➮ Press the soft key 4 with the display
allocation “BEEP”.
➮ Adjust the volume using the and
buttons.
If you wish to deactivate the beep,
➮ press the button 7.
“BEEP OFF” appears on the display.
➮ Press the OK button 5 to return to the
previous menu level or the MENU but-
ton 8 to leave the menu altogether.
The settings are now stored.
Audio settings
Note:
You can adjust the bass, treble and loudness
settings separately for each audio source.
Bass settings
➮ Press the AUD button 9.
“AUDIO 1” appears on the display.
➮ Press the soft key 4 with the display
allocation “BASS”.
➮ Press the or button 7 to adjust
the bass.
When the settings have been completed,
➮ press the AUD button 9.
Treble settings
➮ Press the AUD button 9.
“AUDIO 1” appears on the display.
➮ Press the soft key 4 with the display
allocation “TREB”.
➮ Press the or button 7 to adjust
the treble.
When the settings have been completed,
➮ press the AUD button 9.
Loudness
Loudness means the bass levels are aurally
compensated, i.e. they are increased at low-
er volume levels.
➮ Press the AUD button 9.
“AUDIO 1” appears on the display.
➮ Press the soft key 4 with the display
allocation “LOUD”.
➮ Press the or button 7 to adjust
the loudness.
AUDIO SETTINGSVOLUME
To Next Page
Loading...
