57
DEUTSCH
ENGLISH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
Naming a station
You have the option of giving a preset station
a four-digit name to appear on the display.
➮ Press the MENU button 8.
➮ Press the soft key 4 with the display
allocation “TUN”.
➮ Press the soft key 4 with the display
allocation “NAME”.
This brings you to the edit mode. If the se-
lected station is still unnamed, four underlines
appear on the display.
The current input position flashes.
➮ Select the station you would like to
name by pressing the soft key 4 with
the display allocation “PREV” or “NEXT”
for the previous or next preset station on
that memory level.
➮ Use the / buttons 7 to select your
characters. If a position remains blank,
you select the underline.
➮ You can change the input position using
the or button.
➮ Press the OK button 5 to store the
name.
➮ Press the OK button 5 to return to the
previous menu level or the MENU but-
ton 8 to leave the menu altogether.
The settings are now stored.
Clearing station names
➮ Press the MENU button 8.
➮ Press the soft key 4 with the display
allocation “TUN”.
➮ Press the soft key 4 with the display
allocation “NAME”.
This brings you to the edit mode.
➮ Select the station name you would like
to clear by pressing the soft key 4 with
the display allocation “PREV” or “NEXT”
for the previous or next preset station on
that memory level.
➮ Press the soft key 4 with the display
allocation “CLR”.
The station name is now cleared.
Resetting station names to RDS names
➮ Press the MENU button 8.
➮ Press the soft key 4 with the display
allocation “TUN”.
➮ Press the soft key 4 with the display
allocation “NAME”.
This brings you to the edit mode.
➮ Select the station name you would like
to reset by pressing the soft key 4 with
the display allocation “PREV” or “NEXT”
for the previous or next preset station on
that memory level.
➮ Press the soft key 4 with the display
allocation “DEF”.
The station name is reset to the abbreviation
of the RDS station name.
RADIO MODE
To Next Page
Loading...
