EasyManua.ls Logo

Blaupunkt London CD70 - Naming Cds

Blaupunkt London CD70
38 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
63
DEUTSCH
ENGLISH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
The current TPM status (TPM ON or TPM
OFF) appears briefly on the display. When
playback of favourite tracks is active, an ar-
row symbol lights up alongside TPM on the
display.
Clearing preset tracks
In order to clear individual tracks from the list
of favourite tracks for a CD,
switch on TPM;
select the track you wish to clear;
hold down the soft key 4 with the dis-
play allocation CLR for approx. two
seconds.
TR CLR appears briefly on the display and
the track is cleared from the list.
Clearing the list of favourite tracks for a
CD
You can also clear the entire list of favourite
tracks for a CD. The CD whose favourite tracks
you wish to clear must be inserted at the time
of clearance.
Switch on TPM.
Hold down the soft key 4 with the dis-
play allocation CLR for approx. five
seconds.
CD CLR appears briefly on the display and
the list is cleared.
Naming CDs
To make it easier for you to recognise your
CDs, the car radio offers an individual name
option for 30 CDs. The names should have a
maximum of eight digits.
If you attempt to allocate more than 30 names,
FULL will appear on the display.
Entering/altering CD names
Listen to the desired CD.
Press the soft key 4 with the display
allocation NAME.
This brings you to the edit mode. If the CD
you have selected is not yet known to the unit,
eight underlines will appear on the display.
The current input position flashes.
Use the or buttons 7 to choose
your characters. Should a position re-
main blank, you select the underline.
Use the or button 7 to change the
input position.
Press the OK button 5 to store the
name.
Clearing a CD name
Listen to the CD whose name you wish
to clear.
Press the MENU button 8.
Press the soft key 4 with the display
allocation CD.
Hold down the soft key 4 with the dis-
play allocation CD until CD CLR ap-
pears on the display.
The CD name has now been cleared.
Press the OK button 5 to return to the
previous menu level or the MENU but-
ton 8 to leave the menu altogether.
The settings are now stored.
Clearing all CD names
Listen to a CD.
Press the MENU button 8.
Press the soft key 4 with the display
allocation CD.
Hold down the soft key 4 with the dis-
play allocation ALL until MEMO CLR
appears on the display.
All CD names have now been cleared.
Press the OK button 5 to return to the
previous menu level or the MENU but-
ton 8 to leave the menu altogether.
The settings are now stored.
CD MODE

Table of Contents

Related product manuals