Remote control
1--Power/standby off & on; 2--Eject.
3--Folder +/-; 4, 11--Previous/Next, fast-forward/fast-rewind.
5--Random; 6--stop, auto scan.
7--mute, alarm; 8,9,10--play source, CD/USB/FM.
12--Play/pause; 13--Program, memory.
14--Repeat; 15--Tune +/-, 10 +/-.
16--Volume +/- 17--EQ(flat/classic/rock/POP/jazz), clock.
System and power setting
1. Using the attached speaker wire of satellite speaker connect with the speaker
output terminal of the main unit. Then connect another satellite speaker with same
method.
2. Using the supplied FM pig tail antenna plug into the FM socket on the rear panel
of main unit, and full extent the FM antenna in order to get better reception.
3. Please check if the power source is correspond to the rating voltage spec which
locates on the back panel of main unit. If it does not matching, please consult to your
dealer or service center.
4. Insert the attached AC power plug into the wall outlet in order to get the power.
The front panel power LED will light on in red color when the power is ready.
MS40BT
8
To Next Page
Loading...
