FM radio operation
Before start the FM radio listening, please check if the FM antenna is plugged into
the rear FM socket properly; Full extent the FM antenna or move the unit next to
the window in order to better FM reception.
1. Auto scan and preset radio station: Press the source button repeatedly or FM
button from remote control to enter the FM radio mode; press and hold the auto
scan or stop button 2 seconds from remote control or top panel to scan and save
the available radio station automatically. The unit can save up to 50 (max) preset
stations.
2. Preset station picking up: in radio mode, press the previous and next from
remote control or top panel of main unit to pick up the preset station.
3. Manual tune or auto scan: short press the tune +/- button to increase or
decrease 0.05MHz frequency per step base on the current station; press and
hold the button 2 seconds to auto scan the available FM station in upward or
downward frequency, and will stop and play the available station automatically.
4. Station memory manually: using the tune +/- button to tune the favorite station
that you desire to save; press the memory button from remote control first, then
the preset station digits will flare on display, press the previous and next button
to switch the preset station location that you desire to save; Then press the
memory button to confirm it; and the current FM station will be saved. Please
repeat the operation to save other station.
Notes: the unit will show the available preset station only.
USB operation
The product includes USB playback function which can decode and play the music
from a USB storage device. Before start the operation, please copy the MP3
format music into a USB stick. The max supported USB stick device is up to 32 GB.
1. Before start the USB playback, please make sure the USB stick was plugged
properly into the USB port. Then switch to USB playback mode by press the
source or USB button. Then unit will decode and start to play the music
automatically after few seconds.
2. In USB mode, you can achieve the play and pause, stop, mute, repeat, track
selection, EQ, fast-forward and fast-rewind function etc. Please reference the
operation from the general operation part on this manual.
Notes:
a. Connect the USB stick by a USB extension cable for playback is not
recommended which may produce noise or intermittent sound due to audio
data loss during transfer.
b. Decode and playback all MP3 format music is not guaranteed.
c. The max supported USB device is 32GB.
d. Some USB sticks may take a little long time to playback; please kindly note this is
not malfunction.
Bluetooth operation
This product includes Bluetooth function which can wireless playback the music
from other Bluetooth device.
1. Press the source button repeatedly enter to Bluetooth mode, the display will
show “ BT” in Bluetooth mode. Enable the Bluetooth function and start to search
available device on your Bluetooth device (please reference the device manual
for operation), then check the available Bluetooth device list on your device.
MS40BT
11
To Next Page
Loading...
