2. Select “ BP MS40BT” for pairing; a short notice sound will comes out from the
speaker after the Bluetooth paired successfully.
3. Select and play the music from your Bluetooth device, then the music will
output from the micro system.
4. Press the previous/next button can select last and next track during playing.
Press and hold the play/pause button 5 seconds can disconnect and quit the
unit with current paired Bluetooth device.
5. In Bluetooth mode, you can achieve play/pause, mute, EQ etc. function. Please
reference the operation from the general operation part on this manual.
Notices:
a. All Bluetooth devices are not guaranteed for pairing successfully due to
different design and brand.
b. The best working distance of Bluetooth is within 10 meters without any obstacle
in between.
c. The unit only can pair and work with one Bluetooth device in one time.
d. Please quit the current Bluetooth pairing before pair with other device,
otherwise the “ BP MS40BT” will not show on the device list.
AUX IN/line in/MP3 link and headphone operation
In order to wire playback the music from other player or source, please follow up below
operation.
1. Using the supplied audio cable( 3.5mm to 3.5mm stereo connector) connect the
AUX IN jack(3.5mm stereo type) on front panel of main unit, and the another
3.5mm stereo connector connect with line-out or headphone jack of
outsourcing player.
2. Select the music and play on your player, then the sound will output from the
micro system.
3. In AUX IN playback mode, the main control is on the outsourcing player side. But
you also can control the volume, EQ and mute the sound on the micro system
side.
Headphone: plug the headphone connector into the headphone jack on front panel,
then the sound will silence in micro system, but output from the headphone. Adjust
volume setting on micro system or headphone to get the comfortable sound level for
listening.
Clock time and alarm (playback wake up and auto play) setting
The unit includes clock time and alarm setting which allows you to enjoy the
entertainment base on a personal wake up time, and the music will start to play
automatically when the setting time is coming on.
1. Clock setting: in standby mode, press and hold the clock button few seconds from
remote control to start the setting, and 24 hours time format will flare on display;
press next and previous button to select the 12/24 time format, and press the clock
button again to confirm your selection; then the hour digits will flare on display ;
press next and previous button to adjust the hour, and press the clock button again
to confirm; then the minute digits will flare on display, press next and previous to
adjust minute, then press clock button again to confirm and finish the clock setting.
MS40BT
12
To Next Page
Loading...
