6. Folder +/-, 10+/- button: Press 10 +/- button can skip the playing track by increase
or decrease 10 in case of over 10 tracks inside and get fast selection; press Fold +/-
button to switch the playing track by folder in case of over 2 folders inside. The function
is available in CD and USB playback mode.
7. Play,pause and stop:In CD/USB/Bluetooth mode, press the play and pause button
to pause or resume the playback; In CD and USB mode, press the stop button to stop the
playback, and press play button for music playback resuming.
8. Previous and next, Fast-forward and fast-rewind: short press it skip to last or
next track for playback; Press and hold it to fast-forward or fast-rewind current playing
track, and resume to normal playing after release the button.
9. Repeat playback: In CD and USB mode, press repeat button repeatedly for repeat
one, repeat all, repeat folder( in case of folder inside) and repeat off selection;
10. Random playback: press random button for shuffle and shuffle off playback.
11. CD disc eject: Press it to load a CD or close the CD door.
CD playback operation
This product includes CD playback function which can play with CD disc under CD/CD-R-
RW/MP3 audio format (DVD not included). Before start the CD playback, please check if
there have any dirty dot or scratch on the CD disc, otherwise the CD may cannot read out
or create noise sound.
1. Press the source button repeatedly or CD button to enter the CD mode.
2. Press the eject button open the CD door, and load the CD disc into the CD tray;
press the eject button again to close the CD door. The unit will start to read and play the
CD automatically.
3. Create your own playlist ( max programmed 20 track for CD and MP3 disc, and up to
99 tracks for WMA disc)
a. In CD playback mode, press the stop button first, then press program button to
start the program operation.
b. The display will show “ PR__”, press the previous/next or 10+/- button to select the
track that you want to be programmed, and press the program button again to
confirm.
c. Then the display will show the programmed track and skip to next program track
setting. For example, “009 PR 06” means the number 9 track was programmed as
the number 06 track.
d. Repeat the above step b and C to set up reset track till the display show “ FULL”.
e. Then press the play button to start the programmed playlist playing.
f. To cancel and remove the programmed playlist, press the stop button twice, or
eject the CD disc.
4. You can also achieve the play and pause, stop, mute, repeat and random, track
selection, EQ, fast-forward and fast-rewind function etc. during CD playback. Please
reference the general operation part on this manual.
MS40BT
10
To Next Page
Loading...
