Blaupunkt New Jersey MP68 - Redirecting an Ongoing Phone Call to the Cell Phone; Storing and Calling a Phone Number in the Phone Book of the Device; Storing Phone Numbers; Calling a Phone Number

109
Bluetooth® phone call
ENGLISH
Redirecting an ongoing phone call
to the cell phone
By default, the voice of the person calling you
is played back via the loudspeakers of the vehi-
cle during a phone call. You can also redirect a
phone call to your cell phone:
Briefl y press the
button 5.
The loudspeakers in the vehicle are muted and
your calling partner is switched to your cell
phone; the display shows "IN CALL–HANDSET".
Pressing the
button again plays the sound
via the loudspeakers in the vehicle; the display
shows "IN CALL–HANDSFREE" again.
OR
Press the On/Off button ? for longer than
2 seconds.
The car sound system is switched off and your
caller is redirected to your cell phone.
Storing and calling a phone number
in the phone book of the device
The device features its own phone book in which
you can store 10 entries. Every entry consists
of a name and a phone number. The numbers
stored in the phone book of the device are avail-
able independent of the currently connected cell
phone.
Storing phone numbers
To store an entry in the phone book of the de-
vice,
open the Bluetooth® menu.
Press the rocker switch
or @ until the
"
RADIO" menu item (phone book of the
device) is selected.
Press the OK button : to call up the menu
item.
The "ADD NEW" menu item is selected.
Press the OK button :.
쏅
쏅
쏅
쏅
쏅
쏅
You can now enter your the name of the entry
with up to 20 characters:
Enter the name by pressing the correspond-
ing buttons of the A keys. Select the
desired letter, if necessary by pressing a
button several times.
After entering one letter, the device automatical-
ly switches to the next one. To correct any entry
errors, select the corresponding digit by press-
ing the rocker switch
or @ again.
After entering the complete name,
press the OK button :.
Now you can enter the phone number:
Enter the number sequence by pressing the
corresponding buttons of the A keys.
After entering the complete phone number,
press the OK button :.
The new entry is stored.
Calling a phone number
To call a number stored in the phone book of the
device,
open the Bluetooth® menu.
Press the rocker switch
or @ until the
"
RADIO" menu item (phone book of the
device) is selected.
Press the OK button : to call up the menu
item.
Press the rocker switch
or @ until the
"VIEW PBK" menu item is selected.
Press the OK button :.
The entries of the phone book of the device are
displayed.
Select the desired entry with the rocker
switch
or @.
Press the
button 5 to make the call.
The display shows "CALLING" and the selected
entry in the phone book.
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
02_NJerseyMP68_gb.indd 10902_NJerseyMP68_gb.indd 109 29.10.2008 11:00:01 Uhr29.10.2008 11:00:01 Uhr