Blaupunkt New Jersey MP68 - User Settings; Opening the System Menu; Changing the Welcome Text (on MSG); Changing Time Settings

116
User settings
User settings
In the System menu, you can adjust these preset-
tings to your preferences:
Welcome text
Clock settings
Volume settings
Display settings
Scan time
Opening the System menu
Press the MENU button 9.
Press the rocker switch
@ to open the
"Syst" System menu.
Changing the welcome text
(ON MSG )
When you switch on the device, an animation ap-
pears. It contains the factory set welcome text
"THE ADVANTAGE IN YOUR CAR". To change this
text,
in the System menu, press the rocker switch
or @ until the "ON MSG" menu item is
selected.
Press the OK button : to call up the menu
item.
The current welcome text is displayed. The posi-
tion digit fl ashes and can be changed. You can
now enter your own welcome text with up to
35 characters:
Enter the text by pressing the corresponding
buttons of the A keys. Select the desired
letter, if necessary by pressing a button
several times.
After entering one letter, the device automatical-
ly switches to the next one. To correct any entry
errors, select the corresponding digit by press-
ing the rocker switch
or @ again.
After entering the complete welcome text,
press the OK button : to store the
welcome text entered.
•
•
•
•
•
쏅
쏅
쏅
쏅
쏅
쏅
Notes:
To quit the text input without changing
the welcome text, press the DIS•ESC
button ;.
If the text entry is interrupted, e.g. by a
traffi c announcement, the previous
changes are not stored.
Changing time settings
The following settings can be changed in the
System menu:
Switching time display on/off (OFF CLK)
Selecting 12h/24h time display
(CLK MODE)
Setting the time (CLK SET)
Switching time display on/off (OFF CLK)
The time can be displayed while the device is
switched off, if the vehicle ignition is switched
on. To switch this time display on/off,
in the System menu, press the rocker switch
or @ repeatedly until the "OFF CLK"
menu item is selected.
Press the OK button : to call up the menu
item.
Switch between the settings with the rocker
switch
or @.
"OFF CLK" : Time display is on.
"OFF CLK" : Time display is off.
Press the OK button : to select a different
function, or press the DIS•ESC button ; to
exit the menu.
Selecting 12h/24h time display (CLK MODE )
The time can be displayed using the 12-hour or
24-hour format.
In the System menu, press the rocker switch
or @ repeatedly until the "CLK MODE"
menu item is selected.
Press the OK button : to call up the menu
item.
•
•
•
•
•
쏅
쏅
쏅
•
•
쏅
쏅
쏅
02_NJerseyMP68_gb.indd 11602_NJerseyMP68_gb.indd 116 29.10.2008 11:00:03 Uhr29.10.2008 11:00:03 Uhr