PP15DAB
Set the Alarm 2
1. During Standby mode, press & hold the SNOOZE/DIM button twice until the Alarm 2
menu is shown, meanwhile, the alarm 2 alert icon flashes on the display.
2. The other setting of Alarm2 refers to Alarm1 setting described above.
· At the set time, the alarm will sound, quietly at first, then gradually building up to the set
volume. When an alarm sounds, the bell icon in the display flashes.
· To cancel the Alarm when it is activated, press and hold the SNOOZE/DIM button or
/OK button, the unit goes to standby.
Snooze
· When the alarm is activated (waking you), short press the SNOOZE button will stop the
alarm one time. The snooze icon “SNOOZE” will show on the display & the alarm icon
flashes simultaneously to show it is on Snooze status.
· The alarm will sound again after 10 minutes (default nap time).
21
To Next Page
Loading...
