Prune Station
This function can delete a station from the stored station list.
1. Press the MENU button.
2. Use the PREV or NEXT button to find <Main Menu>, then press ENTER button.
3. Press either PREV or NEXT button to find <Prune Station>. There is indication
“Press ‘ENTER’ to Prune station” .
4. If you want to prune the station, do as the indication.
Station Order
This function allows you to change the order of the stored stations.
1. Press the MENU button.
2. Use either PREV or NEXT button to find <Main Menu>, then press the ENTER
button.
3. Press either PREV or NEXT button to find <Station Order>.
4. Use the PREV or NEXT button to choose between Multiplex, Alphanumeric and
Active.
5. Press ENTER to save the setting.
DRC ( Dynamic Range Control)
This allows the radio to reduce the dynamic range of the audio signal. The purpose
is to adapt the dynamic range of the audio signal to a noisy listening environment.
NOTE: this option may not be available in some DAB stations.
1. Press the MENU button. When the <Station scan> option appears press either
PREV or NEXT button to find <Main Menu>. Press ENTER button.
2. Use PREV or NEXT button to find <DRC> and then press the ENTER button.
3. Choose between DRC off, DRC low and DRC high.
4. Press ENTER to save the setting.
RX+ 35e
51