Blaupunkt RX+ 35e - Display Modes; Advanced Operation; Factory Reset

SW Version
Follow the below steps to scan the version of this unit.
SD mode):
1. Press the MENU button. Use the PREV/NEXT button to find <Main Menu> and press
the ENTER button.
2. Use the PREV/NEXT button to choose <SW Version> and press ENTER button to
review the version.
(this function does not work in USB or
Signal Strength
RSSI
Language
Follow the below steps to set the language of this unit.
or SD mode):
1. Press the MENU button. Use the PREV/NEXT button to find <Main Menu>, press the
ENTER button.
2. Use the PREV/NEXT button to choose <Language> and press the ENTER button.
3. Choose English or Deutsch by PREV/NEXT button and press ENTER button to confirm.
(this function does not work in USB
Advanced operation
Factory Reset
Follow the below steps to restore to factory settings (this function does not work in USB or
SD mode):
1. Press the button. Use the / button to find < >, then press
the ENTER button.
2. Use PREV/NEXT button to choose <Factory Reset>, then press the ENTER button.
3. Indication "Press 'INFO' To confirm Reset" will be shown on the screen. If you want
to reset, press INFO button to start the reset process.
NOTE: once the reset has taken place, you will lose all your stored presets both DAB+ and FM,
and the internal DAB registry.
MENU PREV NEXT Main Menu
Program Type
"Classical". If no Program Type has been set by the broadcaster then <No PTY> will be
displayed.
This describes the "style" or "genre" of music that is being broadcast e.g. "Rock" or
Radio Text
about the current program. If Radio Text information is not available, then the display will
show <No Radio Text>.
Like in DAB mode the broadcaster can include a scrolling text that displays information
Display modes
Every time you press the “INFO” button, the display will cycle through the following display
modes:
RX+ 35e
53