Blaupunkt SAN MARCOS 370 - Bluetooth Mode; Starting Bluetooth Mode; Registering Bluetooth Devices; Telephone Mode

11
Bluetooth Mode
Bluetooth mode
The Bluetooth® function allows registering cell
phones and media playback devices with the
car audio system.
When you register a cell phone with the car
audio system, you can make phone calls with
the built-in hands-free function. You can
access the lists of dialled numbers and the
phone book of the registered cell phone.
If the connected Bluetooth® device supports
the functions A2DP and AVRCP, you can play
the music via the car audio system and control
the playback. During a call, the music playback
is interrupted and continued again after the
call.
If a cell phone is registered via Bluetooth® and
a call is received during the playback of
another source, the source playback is
interrupted and the call menu is displayed.
Starting Bluetooth mode
In the main menu, press on [ Phone ].
E
The Bluetooth® menu is displayed. It
contains the list of known Bluetooth®
devices. Other audio sources are switched
off.
Registering Bluetooth devices
If you want to register a device with the car
audio system for the first time, proceed as
follows:
Ensure that Bluetooth® is activated at the
E
car audio system and at your Bluetooth®
device.
Search for new devices/connections on
E
your Bluetooth® device.
The car audio system appears as "San
E
Marcos 370" in the list of Bluetooth®
devices.
Establish the connection; you may have to
E
enter the pairing code that was previously
entered on the car audio system.
The connection is being established and
the menu for the registered device is
displayed.
Note:
If a telephone is connected with the car
audio system, the Bluetooth® icon is
displayed at the top left of the display in all
audio/video sources.
Once the phone is paired with the radio the
below menu appears
Telephone mode
If you connected a phone with the car audio
system via Bluetooth®, the following menu
appears.
[ ] Display the dial keypad menu.
[ ] Call up records lists.
[ ] Call up the phone book.
[ ] Disconnect the device
[ ] Dial/Answer a call
[ ] End/Reject a call
[ ] Transfer the call to the phone
Enter a phone number with the keypad
E
and press the [ ] button.
Or
Select a contact/number via the caller lists
E
or phone book.
A call will be initiated.