EasyManua.ls Logo

Blaupunkt SEVILLA MP38 - Control Panel and Power Settings; Switch-off Timer and Timeout; Power On;Off Methods

Blaupunkt SEVILLA MP38
50 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
42
Switch-off time (OFF TIMER)
After opening the control panel, the device
is switched off after an adjustable time. You
can set this time from 0 to 30 seconds.
Press the MENU•OK button 5.
Press the
or button 4 repeatedly
until the displays shows "OFF TIMER".
Press the
button 4 to open the
menu.
Set the time with the
or button 4.
When you have fi nished making your chang-
es,
press the ESCAPE button <.
Timeout function
The device features a time-out function
(time window).
For example, if you press the MENU•OK
button 5 and select a menu item, the de-
vice switches back after approx. 8 seconds
after the last button activation. The settings
performed are saved.
Switching on/off
There are various ways of switching the de-
vice on/off:
Switching on/off with the On/Off button
For switch-on, press the On/Off but-
ton 6.
The device switches on.
To switch off the device, press and hold
down the On/Off button 6 for longer
than two seconds.
The device switches off.
Switching on/off using the vehicle
ignition
The device will switch on/off simultane-
ously with the ignition if the device is cor-
rectly connected to the vehicle’s ignition as
shown in the installation instructions and
you did not switch the device off by press-
ing the On/Off button 6.
Switching the device off using the
detachable control panel
Detach the control panel.
The devices switches off after the time set
in the "OFF TIMER" menu.
Note:
To protect the vehicle battery, the de-
vice will switch off automatically after
one hour if the ignition is off.
Detachable control panel Switching on/off
02_SevillaMP38_gb.indd 4202_SevillaMP38_gb.indd 42 02.11.2007 8:50:15 Uhr02.11.2007 8:50:15 Uhr

Table of Contents

Related product manuals