Blaupunkt SEVILLA MP38 - Audio Tone and Balance Control; Treble Frequency and Level Adjustment; Volume Distribution (Balance;Fader)

62
Adjusting treble frequency and level
Press the AUD button >.
"BASS" appears on the display.
Press the
or button 4 repeatedly
until "TREBLE" appears on the display.
Press the
button 4 once to reach
the TREBLE submenu.
Press the
or button 4 repeatedly
until the desired treble frequency ap-
pears on the display.
Press the
or button 4 to adjust
the level between -7 and +7.
Press the AUD > button twice to exit
the menu.
Note:
If an Equaliser preset (POP, ROCK,
CLASSIC) is selected, the manual in-
crease of the treble level does not re-
sult in an audible change starting at a
certain setting. For further informa-
tion, please read the note in the section
entitled "Equaliser presets".
Setting the left/right volume
distribution (Balance)
To adjust the left/right volume distribution
(balance),
press the AUD button >.
"BASS" appears on the display.
Press the
or button 4 repeatedly
until "BAL" appears on the display with
the current setting.
Press the
or button 4 to adjust
the balance (right/left).
Press the AUD > button to exit the
menu.
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
Adjusting the front/rear volume
distribution (Fader)
To adjust the front/rear volume distribution
(fader),
press the AUD button >.
"BASS" appears on the display.
Press the
or button 4 repeated-
ly until "FADER" appears on the display
with the current setting.
Press the
or button 4 to adjust
the volume distribution front/rear.
Press the AUD > button to exit the
menu.
쏅
쏅
쏅
쏅
Sound
02_SevillaMP38_gb.indd 6202_SevillaMP38_gb.indd 62 02.11.2007 8:50:22 Uhr02.11.2007 8:50:22 Uhr