Blaupunkt SEVILLA MP38 - Sound Adjustments; Bass Frequency and Level Adjustment; Middle Frequency and Level Adjustment

61
ENGLISH
Sound
You can adjust the sound settings (bass,
middle and treble) separately for each
source (radio, CD, CD changer, AUX, traf-
fi c announcement, telephone/navigation).
The volume distribution settings (balance
and fader) and X-BASS apply to all the au-
dio sources except for traffi c announce-
ments and telephone/navigation. You can
adjust the volume distribution settings
separately for traffi c announcements and
telephone/navigation.
Note:
The settings of the sound for traffi c an-
nouncements and telephone/naviga-
tion can only be made during a traffi c
announcement or during a telephone
call/voice output.
Adjusting the bass
You can select 1 of 4 middle frequencies
(60 Hz, 80 Hz, 100 Hz, 200 Hz). In ad-
dition, you can adjust the level between
-7 and +7 for the selected bass frequency.
Adjusting bass frequency and level
Press the AUD button >.
"BASS" appears on the display.
Press the
button 4 once to reach
the BASS submenu.
Press the
or button 4 repeatedly
until the desired bass frequency ap-
pears on the display.
Press the
or button 4 to adjust
the level between -7 and +7.
Press the AUD > button twice to exit
the menu.
쏅
쏅
쏅
쏅
쏅
Note:
If an Equaliser preset (POP, ROCK,
CLASSIC) is selected, the manual in-
crease of the bass level does not result
in an audible change starting at a cer-
tain setting. For further information,
please read the note in the section
entitled "Equaliser presets".
Adjusting the middle
You can select 1 of 4 centre frequencies
(500 Hz, 1 kHz, 2 kHz, 3 kHz). In addition,
you can adjust the level between -7 and +7
for the selected centre frequency.
Adjusting centre frequency and level
Press the AUD button >.
"BASS" appears on the display.
Press the
or button 4 repeatedly
until "MIDDLE" appears on the display.
Press the
button 4 once to reach
the MIDDLE submenu.
Press the
or button 4 repeatedly
until the desired centre frequency ap-
pears on the display.
Press the
or button 4 to adjust
the level between -7 and +7.
Press the AUD > button twice to exit
the menu.
Adjusting the treble
You can select 1 of 4 treble frequencies
(10 kHz, 12 kHz, 15 kHz, 17 kHz). In ad-
dition, you can adjust the level between
-7 and +7 for the selected treble frequency.
쏅
쏅
쏅
쏅
쏅
쏅
Sound
02_SevillaMP38_gb.indd 6102_SevillaMP38_gb.indd 61 02.11.2007 8:50:21 Uhr02.11.2007 8:50:21 Uhr