Blaupunkt SEVILLA MP38 - CD-Changer Playback Features; Random Play and Scanning (CD Changer); Playback Interruption and Control

59
ENGLISH
Random track play (MIX)
To play the tracks on the current CD in
random order,
briefl y press the 5 MIX button 9.
"MIX CD" appears briefl y and MIX lights up
on the display.
To play the tracks on all inserted CDs in
random order,
press and hold down the 5 MIX button
9 for longer than two seconds.
"MIX ALL" appears briefl y and MIX lights up
on the display.
Cancelling MIX
Briefl y press the 5 MIX button 9.
"MIX OFF" appears and MIX on the display
disappears.
Scanning all tracks on all CDs
(SCAN)
To scan (briefl y play) all the tracks on all the
inserted CDs in ascending order,
press and hold down the MENU•OK
button 5 for longer than two sec-
onds.
"TRK SCAN" appears on the display and the
number of the current track fl ashes.
Stopping SCAN
To stop scanning,
briefl y press the MENU•OK button
5.
The currently scanned track will then con-
tinue to be played normally.
Note:
You can set the scanning time. For
further information, please read the
쏅
쏅
쏅
쏅
쏅
section entitled "Setting the scanning
time" in the "Radio mode" chapter.
Interrupting playback (PAUSE)
Press the button 3 9.
"PAUSE" appears on the display.
Cancelling pause
During the pause, press the button
3 9.
Playback is continued.
쏅
쏅
CD-changer mode
02_SevillaMP38_gb.indd 5902_SevillaMP38_gb.indd 59 02.11.2007 8:50:21 Uhr02.11.2007 8:50:21 Uhr