11
Note:
If the inserted CD cannot be played back, "CD
ERROR" is brie y displayed and the CD is au-
tomatically ejected after approx. 2 seconds.
Ejecting a CD
Note:
You must not hinder or assist the drive as it
ejects the CD.
쏅 Press the
button
8
to eject an inserted
CD.
Notes:
• If a CD is ejected and not removed, the
drive will automatically draw it back in
again after approx. 10 seconds.
• You can also eject CDs while the car sound
system is switched o or whilst another au-
dio source is activated.
Connecting/removing a USB data
carrier
Connecting a USB data carrier
쏅 Switch o the car sound system so that the
data carrier will be correctly registered.
쏅 Pull the protective cap of the USB socket
:
to the front until it moves out of the socket
and fold it down.
쏅 Connect the USB data carrier.
쏅 Turn on the car sound system.
If the USB data carrier is initially selected as
audio source, the data are read rst.
Notes:
• If the connected USB data carrier cannot
be seen, "USB ERROR" is brie y displayed.
• The time required for reading in the data
depends on the design and size of the USB
data carrier.
Removing a USB data carrier
쏅 Switch o the car sound system so that the
data carrier will be correctly unregistered.
쏅 Disconnect the USB data carrier.
쏅 Close the protective cap of the USB socket
:
.
Selecting tracks
쏅 Press the / button
7
brie y to change
to the previous/next track.
Note:
If the current track plays longer than 3 sec-
onds, pressing
7
once restarts the track.
Selecting a folder
(only in MP3/WMA mode)
쏅 Press the / button
7
brie y to change
to the previous/next folder.
Fast searching
쏅 Press and hold down the button /
7
until the desired position has been reached.
Interrupting playback
쏅 Press the 3
>
button to interrupt the
playback ("PAUSE") or to continue it.
Scanning all tracks
The scan function scans all available tracks.
쏅 Press the MENU button
2
for approx. 2 sec-
onds to start the scan, or brie y to continue
playing the currently scanned track.
During the scan, the display alternately dis-
plays "SCAN" and the current track number
or le name.
Note:
The scan time can be adjusted (see the chap-
ter "User settings", section "Making settings
in the "VARIOUS" menu", menu item "SCAN
TIME").
CD/MP3/WMA mode