15
Bluetooth®
쏅 Turn the volume control
4
to select a digit
for the respective position.
쏅 Press the
or button
7
to reach the next
or previous position.
쏅 Press the
button
7
repeatedly until you
reach past the last position to con rm the PIN
entered.
Note:
Not all streaming devices require the entry
of a PIN on the car sound system. For some
streaming devices, you have to enter the PIN
of the car sound system instead. For these
devices, press only the
button
7
repeat-
edly until you reach beyond the last position,
thereby con rming the current PIN, and then
enter this PIN on the streaming device.
The display shows "PAIRING" and the Blue-
tooth® symbol
is ashing. The car sound sys-
tem can now be recognised by the streaming
device for approx. 2 minutes and connected.
쏅 Search the car sound system from your stream-
ing device (Bluetooth® name: " BLAUPUNKT")
and establish the connection. Enter the PIN of
the car sound system, if necessary.
The display may show "PAIRED", followed by
"CONNECTED", as soon as the car sound sys-
tem and the streaming device are paired and
connected.
Notes:
• If no connection can be established, the
display brie y shows "CONNECT FAILED".
• After switch-on, the car sound system
automatically attempts to reconnect the
device connected last. If the connection
attempt fails, the display brie y shows
"DISCONNECTED". If necessary, attempt
to re-establish the connection from the
streaming device.
• If the device connected last cannot be
located after switching on the car sound
system, the car sound system attempts to
connect one of the other paired devices. If
none of the devices is located, the display
brie y shows "NO DEVICE".
Telephone functions
Answering/rejecting an incoming phone call
With an incoming call, the display alternately
shows "IN CALL" and the number of the caller. The
current audio source is muted and a ring tone is
played via the loudspeakers of the car sound sys-
tem.
Note:
If the number of the caller is not being trans-
mitted, the display shows "IN CALL" instead
of the number. If the number of the caller is
stored together with a name in the car sound
system, the name of the entry and the num-
ber are displayed (see the section "Storing a
phone number in the car sound system" in
this chapter).
쏅 Press the button
<
to answer the call.
"CALL" and the duration of the ongoing call
are displayed.
쏅 Press the
button
=
to reject the call or
to end the current call.
The display shows "END CALL".
Notes:
• During the call, you can adjust the volume
with the volume control
4
or mute the
device with a short press of the On/O
button
3
.
• You can preset the hands-free volume in the
user menu (see the chapter "User settings",
section "Making settings in the " VOLUME"
menu", menu item "TEL VOLUME").
Making a call
쏅 In the Bluetooth® menu, select the "DIAL NEW
NUMBER" menu item.
쏅 Press the
button
7
to open the entry
menu.
You can now enter a phone number with up
to 20 digits:
쏅 Turn the volume control
4
to select a digit
for the respective position.
To Next Page
Loading...
Need help?
General
